[center]Siemens Simcenter FloEFD 2019.3.0 v4745 for Creo

Siemens Simcenter FloEFD 2019.3.0 v4745 for Creo | 718.6 mb
Language: English, Deutsch, Fran�ais, ??, ???, ???????
[/center]

Mentor, a Siemens business, is pleased to announce the availability of FloEFD is the most popular computational fluid dynamics (CFD) analysis tool that is truly embedded into PTC Creo. It enables design engineers to frontload CFD by moving simulation early into the design process where it is more cost effective to identify and fix problems and enhance productivity by x2 to x40.
Release Simcenter FloEFD Version 2019.3

List of new features;
PDML Import. PDML is originally FloTHERM format which is often used by IC vendors to supply users with IC package simulation model. An IC package definition in *.pdml format can now be imported into FloEFD (requires EDA Bridge license). PDML format contains information about geometry, sources and material properties. The following information can be imported:
EDA Bridge. PCB can now be imported into an existing project. EDA Bridge adds PCB to a separate component which is added into main assembly and PCB definition is added as condition linked from this component (Add from Component). You can easily copy imported PCB to the same project with right-mouse click on PCB component folder in the From Component tree.
Parameters. Project Parameters can now be dependent on goals, time, iterations and travels as a function or table. You can create complex table and formula dependent boundary conditions.
Equation goal. Equation goal can now depend on CAD parameter.
Phase change for all real gases. Phase change is now available for all real gases not only refrigerants.
Averaging in steady-state. Visualized Parameters can now be averaged over user-defined interval of iterations in a steady-state analysis. If you enable averaging, additional parameters appear in the list.
Trajectory speed-up. The "Pattern on Shapes" type now displays trajectories immediately after definition. A new "Sphere" shape provides easier definition of starting points.
Description Min Max auto scaling. A Description's minimum and maximum values can be updated automatically when results are changed. The Description Min Max buttons work as toggle and update Description Min Max until they are reset.
FLOEFD View. A few enhancements in FloEFD free results viewer:
- "Normal to Description" view is added for cut Descriptions.
- Section can now crop Descriptions (Apply to Descriptions option) not only the geometry.
- Rotating now rotates around the centre of the view.
Save As. Added selection of View mode (Wireframe, Shaded, Shaded with Edges).
Results summary. Added turbulence parameters into results summary.
Ray Description. Ray Description is available for definition before calculation and can be processed with Batch Results Processing.
Surface parameters. Offset option is added to Surface parameters.
Point goals. When added points by coordinates you can set the name of the goal.
Remote data management improved. After finishing calculation results from the calculation server are automatically copied to the client computer even if CAD was closed.
Remote calculation with Windows HPC Pack 2016 scheduler. You can now pass various arguments to the scheduler (no need administrative privileges): template, priority, nodes and node groups, hold time.
Creo 6 Support. Creo 6.0 is now supported.
Customize Licenses Feature. Customize Features now lists modules rather than atomic license features. System administrators can now customize the license choice for multiple users using the CustomizeFeatures.exe routine. For details, refer to the "Selecting License Features to Use" in the Installation Guide.
MLS update. This version supports Mentor Standard Licensing (MSL) version 2019_3 which uses FlexNet� 11.16.4. This may require updating the license server.
Problems Fixed in This Release
dts0101386748 Crash at preparing stagein solver for the task with specified Membrane and switched off "Heat conduction in solids"option
dts0101342374 Periodic mesh isn't generated [model specific]
dts0101339484 Long time per iteration in case of perforated plate is specified in the task comparing to the case without perforated plate
dts0101382204 Misinterpreting names of Inlet and Outlet fans in Japanese version
dts0101301814 Too big total temperature variation in turbulent mixing layer for high Mach number solvercomparing to low compressible solver
dts0101186578 Description maximum value definition in CutDescription is not recognized in the clonedproject and old max value from original project is shown
Fully explore the design space for fluid flow and heat transfer effects to create the best design with Simcenter FLOEFD for Creo. The award-winning computational fluid dynamics (CFD) simulation software works inside the PTC Creo interface. It helps you simulate complex geometries at the touch of a button and analyze different variants effortlessly during the design cycle - when it is less expensive to identify and fix problems.
Because of its unique combination of intuitive interface and intelligent, fast and accurate technology, you can insert Simcenter FLOEFD into your current Creo-based design process without any disruption, streamlining your workflow and improving productivity. You can also use Simcenter FLOEFD Flexx, a flexible licensing scheme enabling you to simulate your design on multiple CAD platforms as required by your project or for legacy data.
Simcenter FLoEFD is a front-loading CFD that is fully embedded in the most Popular CAD programs such a Siemens NX, PTC CREO, CATIA V5 and integrate with your CAD geometry. In this video we'll be looking at a radiator which can be found in many automotive applications.

Siemens PLM Software. a business unit of the Siemens Digital Factory Division, is a leading global provider of product lifecycle management (PLM) and manufacturing operations management (MOM) software, systems and services with over 15 million licensed seats and more than 140,000 customers worldwide. Headquartered in Plano, Texas, Siemens PLM Software works collaboratively with its customers to provide industry software solutions that help companies everywhere achieve a sustainable competitive advantage by making real the innovations that matter.
Mentor, a Siemens Business, is a world leader in electronic hardware and software design solutions, providing products, consulting services and award-winning support for the world's most successful electronic, semiconductor and systems companies. We enable companies to develop better electronic products faster and more cost-effectively. Our innovative products help conquer complex design challenges. Mentor is technology leader in full chip emulation, Functional Verification, Design-for-Test and physical verification with its Veloce, Questa, Tessent and Calibre platforms.
Product: Siemens Simcenter FloEFD
Version: 2019.3.0 v4745 for PTC Creo
Supported Architectures: x64
Website Home Page :
wwwplm.automation.siemens.com

Language: multilanguage
System Requirements: PC *
Supported Operating Systems: *
Software Prerequisites: *
Size: 718.6 mb

Supported Platform
- Microsoft Windows 7 Professional, Ultimate or Enterprise 64-bit edition,Microsoft Windows 10 Pro or Enterprise 64-bit (tested with v1809)
- For solver: Microsoft Windows 2012 Server x64, Windows 2012 Server R2 x64, Windows Server 2016 with HPC Pack 2016
- Microsoft Office 2013, Microsoft Office 2010, Microsoft Office 2007
- Microsoft Windows Media Player 7.0 or higher
- Creo Parametric v2 (recommended datecode M250)
?reo Parametric v3 (recommended datecode M160)
Creo Parametric v4 (recommended datecode M070)
Creo Parametric v5 (recommended datecode v5.0.2.0)
Creo Parametric v6 (recommended datecode v6.0.0.0 or 6.0.1.0)
- Ethernet network adapter
- Mouse or other pointing device
- DVD-ROM drive
- 4GB RAM minimum, more recommended
- 1GB of free hard disk space, more required for simulation models

[center]DOWNLOAD LINKS :[/center]

https://rapidgator.net/file/7fe6794d8e1bcfdcc89dc9eecf0f6935/focuc.Siemens.Simcenter.FloEFD.2019.3.0.v4745.for.Creo.rar.html

https://uploadgig.com/file/download/934Afdf6B52c135C/focuc.Siemens.Simcenter.FloEFD.2019.3.0.v4745.for.Creo.rar

https://nitroflare.com/view/19BEBE22E0A825D/focuc.Siemens.Simcenter.FloEFD.2019.3.0.v4745.for.Creo.rar

http://katfile.com/vb4z7z0rtpsw/focuc.Siemens.Simcenter.FloEFD.2019.3.0.v4745.for.Creo.rar.html