[center]Siemens Simcenter FloEFD 2019.3.0 v4745 for CATIA V5

Siemens Simcenter FloEFD 2019.3.0 v4745 for CATIA V5 | 741.2 mb
Language: English, Deutsch, Fran�ais, ??, ???, ???????
[/center]

Mentor, a Siemens business, is pleased to announce the availability of FloEFD is the only computational fluid dynamics (CFD) analysis tool that is truly embedded into CATIA V5. It enables design engineers to frontload CFD by moving simulation early into the design process where it is more cost effective to identify and fix problems and enhance productivity by x2 to x40.
Release Simcenter FloEFD Version 2019.3

List of new features;
PDML Import. PDML is originally FloTHERM format which is often used by IC vendors to supply users with IC package simulation model. An IC package definition in *.pdml format can now be imported into FloEFD (requires EDA Bridge license). PDML format contains information about geometry, sources and material properties. The following information can be imported:
EDA Bridge. PCB can now be imported into an existing project. EDA Bridge adds PCB to a separate component which is added into main assembly and PCB definition is added as condition linked from this component (Add from Component). You can easily copy imported PCB to the same project with right-mouse click on PCB component folder in the From Component tree.
Parameters. Project Parameters can now be dependent on goals, time, iterations and travels as a function or table. You can create complex table and formula dependent boundary conditions.
Equation goal. Equation goal can now depend on CAD parameter.
Phase change for all real gases. Phase change is now available for all real gases not only refrigerants.
Averaging in steady-state. Visualized Parameters can now be averaged over user-defined interval of iterations in a steady-state analysis. If you enable averaging, additional parameters appear in the list.
Trajectory speed-up. The "Pattern on Shapes" type now displays trajectories immediately after definition. A new "Sphere" shape provides easier definition of starting points.
Description Min Max auto scaling. A Description's minimum and maximum values can be updated automatically when results are changed. The Description Min Max buttons work as toggle and update Description Min Max until they are reset.
FLOEFD View. A few enhancements in FloEFD free results viewer:
- "Normal to Description" view is added for cut Descriptions.
- Section can now crop Descriptions (Apply to Descriptions option) not only the geometry.
- Rotating now rotates around the centre of the view.
Save As. Added selection of View mode (Wireframe, Shaded, Shaded with Edges).
Results summary. Added turbulence parameters into results summary.
Ray Description. Ray Description is available for definition before calculation and can be processed with Batch Results Processing.
Surface parameters. Offset option is added to Surface parameters.
Point goals. When added points by coordinates you can set the name of the goal.
Remote data management improved. After finishing calculation results from the calculation server are automatically copied to the client computer even if CAD was closed.
Remote calculation with Windows HPC Pack 2016 scheduler. You can now pass various arguments to the scheduler (no need administrative privileges): template, priority, nodes and node groups, hold time.
CATIA R29 Support. CATIA V5-6 2019 (R29) is now supported.
Customize Licenses Feature. Customize Features now lists modules rather than atomic license features. System administrators can now customize the license choice for multiple users using the CustomizeFeatures.exe routine. For details, refer to the "Selecting License Features to Use" in the Installation Guide.
MLS update. This version supports Mentor Standard Licensing (MSL) version 2019_3 which uses FlexNet� 11.16.4. This may require updating the license server.
Problems Fixed in This Release
dts0101386748 Crash at preparing stagein solver for the task with specified Membrane and switched off "Heat conduction in solids"option
dts0101342374 Periodic mesh isn't generated [model specific]
dts0101339484 Long time per iteration in case of perforated plate is specified in the task comparing to the case without perforated plate
dts0101382204 Misinterpreting names of Inlet and Outlet fans in Japanese version
dts0101301814 Too big total temperature variation in turbulent mixing layer for high Mach number solvercomparing to low compressible solver
dts0101186578 Description maximum value definition in CutDescription is not recognized in the clonedproject and old max value from original project is shown
Simcenter FLOEFD for CATIA V5 puts the power of computational fluid dynamics (CFD) simulation in the hands of the design engineer. An award-winning software, Simcenter FLOEFD works directly inside your CAD software. Now you can explore the full potential of designs quickly: understand the influence of changes in the geometry or boundary conditions on the results effortlessly, conduct fast and frequent what-if analysis, and generate insightful reports.
Realize the full potential of ideas quickly and save time and money by only progressing the design concepts with the most promise to the validation phase and when you need to use multiple CAD platforms on the same project or for legacy data, you can use Simcenter FLOEFD Flexx - a flexible licensing scheme enabling you to simulate your design in the CAD system of your choice.
Simcenter FLoEFD is a front-loading CFD that is fully embedded in the most Popular CAD programs such a Siemens NX, PTC CREO, CATIA V5 and integrate with your CAD geometry. In this video we'll be looking at a radiator which can be found in many automotive applications.

Siemens PLM Software. a business unit of the Siemens Digital Factory Division, is a leading global provider of product lifecycle management (PLM) and manufacturing operations management (MOM) software, systems and services with over 15 million licensed seats and more than 140,000 customers worldwide. Headquartered in Plano, Texas, Siemens PLM Software works collaboratively with its customers to provide industry software solutions that help companies everywhere achieve a sustainable competitive advantage by making real the innovations that matter.
Mentor, a Siemens Business, is a world leader in electronic hardware and software design solutions, providing products, consulting services and award-winning support for the world's most successful electronic, semiconductor and systems companies. We enable companies to develop better electronic products faster and more cost-effectively. Our innovative products help conquer complex design challenges. Mentor is technology leader in full chip emulation, Functional Verification, Design-for-Test and physical verification with its Veloce, Questa, Tessent and Calibre platforms.
Product: Siemens Simcenter FloEFD
Version: 2019.3.0 v4745 for CATIA V5
Supported Architectures: x64
Website Home Page :
wwwplm.automation.siemens.com

Language: multilanguage
System Requirements: PC *
Supported Operating Systems: *
Software Prerequisites: *
Size: 741.2 mb
* System Requirements:

Supported Platform
- Microsoft Windows 7 Professional, Ultimate or Enterprise 64-bit edition, Microsoft Windows 10 Pro or Enterprise 64-bit (tested with v1809)
- For solver: Microsoft Windows 2012 Server x64, Windows 2012 Server R2 x64, Windows Server 2016 with HPC Pack 2016
- Microsoft Office 2013; Microsoft Office 2010; Microsoft Office 2007
- Microsoft Windows Media Player 7.0 or higher
- CATIA V5 R19 (recommended SP9)
CATIA V5 R20 (recommended SP7)
CATIA V5 R21 (recommended SP6)
CATIA V5-6 2012 (R22)(recommended SP6)
CATIA V5-6 2013 (R23) (recommended SP6)
CATIA V5-6 2014 (R24) (recommended SP7)
CATIA V5-6 2015 (R25) (recommended SP6)
CATIA V5-6 2016 (R26) (recommended SP6)
CATIA V5-6 2017 (R27) (recommended SP4)
CATIA V5-6 2018 (R28) (recommended SP0)
CATIA V5-6 2019(R29) (recommended SP2)
- Ethernet network adapter
- Mouse or other pointing device
- DVD-ROM drive
- 4GB RAM minimum, more recommended
- 1GB of free hard disk space, more required for simulation models

[center]DOWNLOAD LINKS :[/center]

https://rapidgator.net/file/451b4402370097259ea6b8f61acd9a7c/7wf94.Siemens.Simcenter.FloEFD.2019.3.0.v4745.for.CATIA.V5.rar.html

https://uploadgig.com/file/download/8d619da860e2E01D/7wf94.Siemens.Simcenter.FloEFD.2019.3.0.v4745.for.CATIA.V5.rar

https://nitroflare.com/view/46D6C755CCA8C96/7wf94.Siemens.Simcenter.FloEFD.2019.3.0.v4745.for.CATIA.V5.rar

http://katfile.com/glti9o0lct7a/7wf94.Siemens.Simcenter.FloEFD.2019.3.0.v4745.for.CATIA.V5.rar.html